LUBING Regulator Kit, 22mm X 600mm, 1 Outlet

The LUBING drinking system for layers is designed in such a way that it can adapted individually to every layer system. Always hold the optimum water supply of the birds in high regard. Additionally pay attention that the environment affect is less as possible. Splash-water should not lead to corrosion or dampen the manure additionally. Our million times approved LUBING nipples and the extensive accessories, e.g. the perches, air channels and drip cups, underlines LUBING as your most competent partner. In order to guarantee optimum water supply for all animals in the system, the drinking line is installed in height of 38 - 41 cm in a distance to the feeding line.

Through the cycle of the animals between the drinking line and the feeding line, no water reaches the feeding trough.

• Water supply:
  • The Main water supply secures an optimum water quality for a long service life of the nipple drinkers. The water should have the quality of drinking water. At any case the water must be filtered. The water runs from the Main water supply through the Pressure regulator or the Ball tank with integrated flush system into the drinking lines. Both versions are available for front or middle-installations.
• Drinking Elements:
  • The drinking lines are supplied in assembled elements of 3 m length. These elements are to be coupled to the length of the house.
• Breather Unit:
  • At the end of each drinking line a flush breather unit is installed. All valves of the breather units close during the flushing, which could be started by hand or alternatively by the automatic flush system.
• Suspension:
  • The drinking lines are suspended by hangers, which are stuck on the aluminum profiles every 3 m. These hangers are connected via ceiling pulleys with the central hoisting cable. The drinking line can be adjusted to the desired height by Hand winch or Ceiling winch and can be winched up easily to the ceiling for emptying or cleaning.